Source Technologies ST9612 Manuel d'utilisateur télécharger pdf (Page 39)

Source Technologies, LLC ST9612 Secure MICR Printer User’s Guide

Replace Photoconductor (printer hard stop)

After the photoconductor unit exceeds 15% beyond the usable life point, the printer will

hard stop with the Error and Toner Low / Replace PC lights BLINKING and the Continue

button ON. If you press Continue, one page will print with instructions in multiple

languages to replace the Photoconductor Unit referring to Appendix F.

Load MICR Toner

The Source Technologies’ Secure MICR Printer only supports MICR toner cartridges in

its normal configuration. This prevents the printing of MICR documents with standard

toner. If configured to support both MICR and standard cartridges, the PJL MICRJOB

command checks the cartridge type and will prompt the operator with the following

pattern to load MICR toner if not present.

MICR Commands | 7

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 45 46 47

Pas de commentaire

Source Technologies ST9612 Manuel d'utilisateur Page 39